Wirelube HD C402

#Wirelube HD C402

Heavy-duty wire rope, chain and gear lubricant.
WIRELUBE HD has been specifically formulated to lubricate and protect wire ropes, chains, gears and pinions. Wirelube HD contains extreme pressure lubricants and colloidal graphite to resist wear under heavy loads and provides a corrosion resistant barrier to protect against the ingress of water and corrosive agents. In addition the formula penetrates deep into the core of the rope providing a flexible coating which is durable and prevents the ingress of abrasive dirt and grit making it ideal for treatment of ropes in heavy lifting equipment used in mining and quarrying. Wirelube HD will resist throw-off, providing exceptional lubrication and protection of slow moving gears, rotor,
pinions, chains and ropes.
• Contains oxidised waxes, mineral oils, molybdenum disulphide and graphite for ultimate performance.
• Lubricates wire ropes, chains, linkages and mechanisms even under extreme load, reducing wear, extending component lifetime and reducing costly maintenance.
• Penetrates deep into the rope’s core using the ropes mechanical action, lubricating and protecting the rope from within.
• Provides exceptional long-term protection from corrosion resisting the effects of moisture salts and other corrosive materials.
• Dries to form a flexible film, which protects ropes against the ingress of abrasive dirt and grit, reducing wear and extending lifetime.
• Film will not throw off at high speeds, reducing splatter and reducing frequency of re application.
• Remains effective at temperatures up to 120°C.
• Coverage will depend on the type of rope and ambient temperature. However one 20Kg keg will treat up to 100 metres of a 19-strand wire rope when applied at 15°C. Application rates will vary for different rope constructions.
• Ideally suited for the lubrication and protection of wire ropes, lift cables, drag lines and chains.
• Wirelube HD is also an exceptional lubricant for routine maintenance of gears, pinions, hinges, linkages and slide ways on earthmoving equipment, vehicles, forklift trucks, plant and equipment.
• Provides exceptional resistance to weathering, corrosion and salt spray making it ideal for protection of equipment and parts during long-term storage or exposure to the elements.
1. For the best results wipe clean or degrease the surface to remove dirt and abrasive grit.
2. Apply directly to ropes, chains and linkages either by brush, grease gun, or air-pressurised automatic lubricator.
3. Reapply as required during routine maintenance.
APPEARANCE : Black viscous grease
VISCOSITY @ 20°C : 75,000 cps
ODOUR : Mild oil/solvent
SOLUBILITY : Insoluble in water
RELATIVE DENSITY : 0.90 – 1.00
FLASH POINT (°C) : >62°C P/M Pensky-Martens
PACK SIZE : 20Kg Keg
Bridon Ropes, Doncaster UK
British Coal Industry Assessment No: 4786
Underground Approval No: A3392
Avoid spilling, skin and eye contact. Provide good ventilation.
Store in closed original container at temperatures between 0°C and 40°C.
Health and Safety Data sheet available separately.

Order now this item:

Your Name Phone
Email Product Name / Code
ten + one =