Shield A056

#Shield A056

 
A056/C284 SHIELD
High quality 3 in 1 corrosion preventive, moisture displacer and light lubricant.
 
SHIELD is an incredibly versatile product which acts as a light duty lubricant, penetrant/ release agent, dewatering fluid and corrosion preventative. Shield contains a blend of cleaning solvents to wash away residues of oil and grease, dispelling water and allowing deep penetration into threads and mechanisms. A combination of mineral oils and oxidised waxes provide lubrication and unrivalled corrosion protection. In aggressive accelerated salt spray tests Shield has been shown to provide up to 3 times the protection of rival products.
 
FEATURES
• Versatile and effective non-sticky light duty lubricant.
• Penetrates and releases corroded components, nuts and bolts.
• Non conductive
• Displaces water from wet components, switches, motors and ignition systems.
• Protects electrical contacts from corrosion.
• Contains oxidised waxes and corrosion preventatives.
• Protects components, mechanisms and equipment from corrosion during storage and following aqueous cleaning.
• In accelerated corrosion testing Shield provided up to 100 hours salt spray resistance.
• Solvent cleaning action flushes away residues of old oil and grease.
• Safe for use on ferrous and non-ferrous metals.
 
APPLICATIONS
• Release of tightly corroded components, nuts and bolts during maintenance and repair.
• Routine lubrication of mechanisms, switches and contacts during maintenance.
• Displacement of water from electrical and ignition systems.
• Protection of components, machined surfaces and equipment from corrosion during storage or transit.
• Protection of manufactured items in production environments to prevent corrosion, aid assembly and ensure items remain in original condition following storage.
 
DIRECTIONS FOR USE
When applying to electrical components and switches ensure power is switched off prior to application and allow to drain and air dry fully before reconnection. Shield may be applied by spraying onto and around the component. For release of nuts and bolts allow a short contact time following application to ensure total penetration. It is often better to tighten nuts slightly to crack the rust prior to unwinding.
Shield may also be used for immersion of components in trays or diptanks. This is particularly effective when using shield as a corrosion preventative in production situations.
 
TECHNICAL DATA (for bulk liquid)
APPEARANCE : Liquid
COLOUR : Brown
ODOUR : Hydrocarbon Solvent
SPECIFIC GRAVITY : 0.80
VOC CONTENT : 644g/l
SOLUBILITY : Insoluble in water
SALT SPRAY : Up to 100 hours
BOILING POINT (°C) : 155
FLASH POINT (°C) : 43 P/M Pensky-Martens.
VISCOSITY : 3 cps @ 20°C
SURFACE TENSION : 20 mN/m @ 20°C
PACK SIZES : (12 x 400ml) and (9 x 600ml) Aerosols 12 X 500ml triggers, 20 and (4 x 5) litres.
 
TECHNICAL DATA (Aerosol)
PROPELLANT : Hydrocarbon
 
APPROVALS
British Coal Industry Assessment No: 2472 (bulk) Powergen UK
China Steel, Shanghai Rail Industry UK Cat: 007/024760
DEF 68-10/2 Annex C Test No: 8, Method A UK Rolls Royce
Elf Aquitaine-Norge Scientifics Approved (UK Rail Industry)
Jurong Shipyard, Singapore Singapore Armed Forces
National Power UK Statens Provningsanstalt Sweden
Nuclear Electric UK Televerket Sweden
 
USAGE PRECAUTIONS
Keep away from heat, sparks and open flame. Ensure that the working area is well ventilated.
 
STORAGE PRECAUTIONS
Store at moderate temperatures in dry, well-ventilated area.
 
STORAGE CLASS
Flammable liquid storage.
 
HEALTH AND SAFETY
Health and Safety Data sheet available separately.

Order now this item:

Your Name Phone
Email Product Name / Code
Comments
ten + one =