Lotoxane Fast C044

#Lotoxane Fast C044

 
C044 LOTOXANE FAST
Highly refined low odour solvent degreaser.
 
LOTOXANE FAST is a highly refined solvent blend offering a combination of low odour excellent degreasing power and minimal residue on drying. Due to its high purity Lotoxane Fast provides a safer alternative to the most hazardous solvents used throughout Industry, Lotoxane Fast therefore provides one solution for use on the most sensitive metals and plastics and in critical applications as well as for general oil and grease removal.
Lotoxane Fast evaporates three times faster than standard Lotoxane but shares its other properties of low odour, safety on surfaces and minimal residue on drying.

FEATURES
• Highly refined for minimal residue on drying.
• Low odour and controlled evaporation reduce exposure in the workplace.
• Contains no aromatic hydrocarbons.
• Excellent compatibility with metals and most plastics.
• Flash point 40°C, Lotoxane Fast will evaporate and dry three times faster than standard Lotoxane.
• Tested and approved by aerospace and other critical manufacturers.
• Superb degreasing performance.
• Provides a versatile degreasing solution to meet all manufacturing, maintenance, inspection and surface preparation needs.
• Can reduce solvent consumption, reducing cost in use and aiding compliance with VOC limits.
 
APPLICATIONS
• Removal of oils, greases, machining fluids, hydraulic fluids, and hydrocarbon-based protective coatings in manufacturing processes.
• Pre cleaning prior to NDT testing or inspection.
• Final cleaning prior to welding, painting, bonding or coating.
• Degreasing of machinery, components and assemblies during maintenance and repair.
• Cleaning electrical and electronic equipment.
• De-watering following aqueous processing. Application of Lotoxane Fast to wet surfaces will dispel unwanted water from components and electrical systems
 
DIRECTIONS FOR USE
Lotoxane Fast may be applied to the surface by brush or spray, agitate stubborn deposits if required with a brush and wipe away residues with clean cloth. The product may be left to air dry naturally. Lotoxane Fast is also suitable for use in dip tank applications. Dip components in Lotoxane Fast, allow a short contact time, remove from the solution and allow to drain. Heavily soiled components may require agitation with a brush. To reduce losses from the tank it is advised that a close fitting lid is used when the tank is not in use. Whilst components may be allowed to air dry naturally drying times can be reduced by wiping away excess material with a cloth or by employing forced air drying techniques.
 
TECHNICAL DATA
APPEARANCE : Liquid
COLOUR : Colourless
ODOUR : Mild
SOLUBILITY : Insoluble in water
BOILING POINT (°C) : 160
RELATIVE DENSITY : 0.75 @ 15 °c
FLASH POINT (°C) : 40 P/M Pensky-Martens
FLAMMABILITY LIMITS:
LOWER (%) : 0.60
UPPER (%) : 6.50
Acids : Nil ASTM D1613
Chlorides : 1 ppm
Sulphur : 1 ppm
Peroxides : Less than 1 ppm
Nitrogen : 1 ppm
Copper Corrosion : 1 ASTM D130
Residue on evaporation : Minimal
VOC Content : 750 g/L
PACK SIZES : 210, 20 and (4 x 5) litres and (12 x 500mls) Trigger Spray
 
APPROVALS
Referenced in Standard Practice Manuals Procedures of: -
CFMi CFM-56 Engine CPM (Consumable Products Manual) Ref.: CP2727
G. E. Aircraft Engines
International Aero Engines
Pratt & Whitney
Rolls Royce Aero Engines
British Coal Industry Assessment No: 7423
British Nuclear Electric
Drydocks World Dubai
Scientifics (UK Rail Industry)
UK Ministry of Defence – NATO Stock No: 6850-99-215-6088
 
USAGE PRECAUTIONS
Keep away from heat, sparks and open flame. Provide good ventilation. Avoid contact with eyes.
 
STORAGE PRECAUTIONS
Store at moderate temperatures in dry, well-ventilated area. Keep away from heat, sparks and open flame.
 
STORAGE CLASS
Flammable liquid storage.
 
HEALTH AND SAFETY
Health and Safety Data sheet available separately.

Order now this item:

Your Name Phone
Email Product Name / Code
Comments
ten + one =